FDS Copy Master v1.1 (lastest)

Copy Master software original from BUNG cracked by Me. (Keep original, no any modify). This fds image is doctor format (copier format). So, you need fds copier to run it. FDS Copy Master (631 downloads)

Copy Master use to Backup game/Copy game/Drive speed tuning. I was told that speed “5” is the best speed. But as I remember, new drive have speed “1”. (I maybe wrong)

How to use :
1) Flash image to FDSSTICK.
2) Plug in copier to your Famicom. (Plug power supply to copier too)
3) Plug FDSSTICK to ram adapter.
4) Turn on your Famicom to load it.
5) Unplug FDSSTICK and plug ram adapter to FDS Drive.
6) You can Copy game/Drive speed tuning now.

FDSSTICK Start..


FDSStick

  • It’s a Famicom Disk System (FDS) drive emulator.
  • Holds up to 8 disk sides. Push button # times to change disks, or hold button to eject.
  • Device can also read/write disks from an FDS drive with an adapter cable (not included).

For USA orders, please go to loopy’s site.

For international orders, please go to Tototek.com.

Console app (GitHub repo) Multi-platform. Windows binary is provided.
Windows app Small tool for writing files to FDSStick. Drag and drop a .FDS file onto FDSCopy.exe


Making an adapter cable

For disk reading / writing, join two RAM adapter cable ends together. Nintendo AV cables (for SNES / N64 / Gamecube) can also be used, you’ll need to cut the bumps off them to make them fit.

     ##########################   
  ################################
  ###  C   A   8   6   4   2   ###
  ###                          ### 
  ###  B   9   7   5   3   1   ###
  ################################
  ################################

      End of RAM adapter cable

  Join pins 1, 2, 3, 4, 5, 9, B, C from one connector to the other.
  Leave the other pins unconnected. 
Most AV cables have some pins missing (if you know one that doesn't, let me know!) I've found that Cinpel SCART N64 cables have enough pins, but one is in the wrong place.

If you only want to read disks, splice all the same colored wires on a Cinpel cable together EXCEPT black, leave it unconnected.
For writing, also join the black wires, then open up both connectors and move pin 8 to pin 5.


loopy@mm.st